V8 engine block assambley Research Paper Example | Topics and Well Written Essays - 250 words

V8 engine block assambley - Research Paper Example The first thing to go onto the block is the cam shaft. It is important to keep very clean while installing all engine components. It is important to lube the cam while installing. Second, the crank shaft must be installed and checked. After the crank shaft is installed it is necessary to install the rear main seal with gaskets if needed. Third, the timing gear and chains need to be properly installed. After the timing is accurate, the oil wrist pins, rod bearing and the rings need to be properly installed on the pistons. Next, it is important to properly oil all cylinders, bearing, rings and crankshaft. Then it is very important to install the pistons. The pistons need to be at a certain compression to prevent damage. After the pistons are installed, make sure all rods and pistons are in the correct spot. This can be achieved by proper torque of all rod nuts. Then it is important to install the timing cover and oil pump, followed by head gaskets, head, and bolts. At this time the valves need to be set. Finally, the valve covers can be installed and the engine is